The bolt pattern for a 2011 Buick Lucerne is 5x115 (or 5x4.52 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 115 mm (4.52 inches) diameter.
One of the simplest yet cool 2011 Buick Lucerne mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2011 Buick Lucerne lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2011 Buick Lucerne and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2011 Buick Lucerne's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
Measures the distance from the hub mounting surface to the center of the wheel. It is vehicle specific.
A machined opening in the center of the wheel. It must be "Hub Centric" to reduce vibration.
The outer diameter of your wheel stud threads in either metric (M12, M14, etc.) or standard units (1/2", 9/16", etc.).
Dimensions of the stock tires, including its width, aspect ratio (sidewall), and diameter.
The purpose of a hub-centric ring is to ensure the wheel is properly centered on the hub of the vehicle.
Outer Diameter (Wheel Bore Size): 75mm Inner Diameter (Vehicle Hub Size):...
Check price on
This 1707S Bulge Acorn Lug Nut is your one-stop solution for aftermarket chrome lug nuts. The heat-treated, cold-forged steel construction provides a reliable replacement and is supplied to...
Check price onWhite Knight has established a solid reputation of providing the automotive aftermarket industry with quality products at competitive prices. White Knight lug nuts are constructed to enhance...
Check price onSpecifications: M12x1.50 Thread pitch, 4.4” Overall height, 0.92” Diameter, 60-degree Conical Seat, Bulge Acorn design, anti-theft spline design. Chrome Finish.
Precision-machine...
Check price on